Getting Down To Basics with

How Often You Need to Flush Your Radiator

Simple vehicle maintenance procedure like radiator flush could add several years to vehicle’s lifespan enabling you to enjoy its maximum use. Every machine seem to operate efficiently at the right temperature and the same goes for vehicles too. A combination of two tanks and a core connected by several narrow tubes make up a car radiator. The coolant becomes hot when the car is one causing the need for its temperature to be lowered by cooler air that enters through the narrow tubes when the car is in motion.

Failure to flush a vehicle’s radiator could mean the engine overheats and breaks down and so it is necessary to ensure the proper functioning of the cooling system. Flushing the engine removes dirt that might diminish the purity of the mixture of antifreeze and distilled water that cools the engine. Some engine parts may freeze during winter because the mixture’s purity is compromised hence leading to some serious damages that might irreparable. For efficient draining of a radiator, wait until the car has cooled down or done it on a day that the car has not been used.

Flushing a radiator entails getting rid of the dirty coolant and refilling it with a new one but for it to be effective a flushing agent must be used. Dirt particles in the engine can block its parts or cause corrosion hence the need of a flushing agent to remove them. Raise the front of the car with a to carjack ten drain fluid by unscrewing the radiator plug into a bowl placed under the car.

Follow the instructions obtained with flushing agent after refilling the engine with distilled water and the flushing agent to ensure you don’t overheat the engine. Free the radiator of the cleaning mixture by draining it once again along with the cylinder valves. If your fresh antifreeze need dilution, use distilled water while following manufacturer’s instruction before filling it in the clean engine. Avoid damage to the engine through localized overheating caused by excess air in the engine system by completely bleeding the system before refilling it with fresh anti-freeze.

You can start the engine to ensure the temperatures are normal after adding the coolant then turning it off to get rid of more trapped air in the system. Consulting a vehicle’s manual or dealer you bought from can help you understand how often your vehicle’s radiator needs to be flushed. A flush should be carried out whenever there is visible rust in the engine otherwise once in every five years is ok. In this site, you will learn more about how often a radiator should be flushed because cars differ from one another. Find time to read more here about how you can maintain your car.